Metrel DeltaPAT & Godex Printer Pack Support

The Metrel DeltaPAT 3309 BT with Godex Bluetooth Printer is a streamlined solution for professionals needing wireless printing in test and tag workflows.

With Bluetooth connectivity, this kit offers greater flexibility onsite - no tangled cables, just fast, compliant testing and labelling.

This support page provides practical help with setup, troubleshooting, and daily use of your DeltaPAT & Bluetooth Godex Printer kit.

Downloads

Metrel DeltaPAT 3309 Cheat Sheet
Metrel DeltaPAT & Godex Printer Pack User Guide
Metrel DeltaPAT & Godex Printer Pack Instruction Manual
Metrel ES Manager User Guide

Software

Metrel ES Manager (reccommended)
Patlink 2.0 * (64bit Version)
USB PC Drivers

*) Please ensure Microsoft NetFramework 3.5 is installed before starting the Patlink Pro setup.

Getting Started with the Kit

To set up your DeltaPAT & Godex Bluetooth Printer kit:

  1. Fully charge your DeltaPAT or connect it to mains power.
  2. Turn on the Godex printer and ensure Bluetooth is active.
  3. On the DeltaPAT, navigate to:
    • Setup > Communication > Bluetooth and search for devices.
    • When prompted, use pairing code: 0000.
  4. Once connected, configure the tester to print automatically or on demand.
  5. Conduct a sample test to confirm printer connection and tag format.

Video Guides

How to Download Data from Metrel DeltaPAT

Locating Missing Data from PATLink

Trustpilot

DeltaPAT & Godex Printer Kit

How do I pair the DeltaPAT with the Godex Bluetooth Printer?

On the DeltaPAT:

  • Go to Setup > Communication > Bluetooth.
  • Ensure Bluetooth is turned ON.
  • Search and select the Godex printer.
  • Enter pairing code 0000 if prompted.
  • Once paired, the tester will remember the device for future sessions.

My tester isn't connecting to the printer – what do I do?

Check the following:

  • The printer is powered on and in Bluetooth mode.
  • The DeltaPAT's Bluetooth is enabled.
  • The printer is not paired with another device.
  • Try restarting both devices and reinitiating the pairing process.

What should I do if nothing prints after a test?

Confirm that printing is enabled in the test sequence.

  • Ensure the correct output device (Bluetooth printer) is selected.
  • Check that the label roll is loaded correctly and not jammed.
  • Reboot both the tester and printer if needed.

How can I customise the labels printed?

Use PATLink Pro or Metrel ES Manager software on your PC to customise label layout, fields, and branding. You can upload test data via USB to edit or print reports.

Can I print immediately after each test?

Yes. In the tester menu, go to:

  • Setup > Test Sequence > Print Settings and enable "Auto Print".
  • This will automatically send results to the printer after each test is completed.

Do I need to install printer drivers for Bluetooth printing?

Not on the DeltaPAT tester. For use with a PC, you may need to install the Godex printer driver for configuration, testing, or firmware updates.

Can I use this kit without a PC or software?

Yes. The DeltaPAT + Bluetooth Printer combo is fully functional as a standalone system, which is ideal for fieldwork. You only need a PC to export data or use advanced reporting features.

What size tags work with the Godex printer?

The printer supports standard thermal direct PAT tags, typically 100mm x 50mm or similar. Always check the roll size and label format before purchasing new stock.

Still Need Help?

Call us on 1300 656 938

Email: sales@appliancetestingsupplies.com.au

Or use TeamViewer for remote support