Metrel Delta Pro Print Pack Support

The Delta Pro Print Pack is designed for high-volume test and tag professionals who need a reliable, fully featured PAT testing and printing solution.

Combining the advanced capabilities of the Metrel DeltaPAT MI 3309 BT with a compatible Zebra direct thermal printer, this pack enables efficient test data capture and on-the-spot label printing.

This page includes all the information you need to get started, troubleshoot issues, and use your kit with confidence.

Downloads

Metrel DeltaPAT 3309 Cheat Sheet
Metrel DeltaPAT 3309 Instruction Manual
Metrel Delta Pro Print Pack Specification Sheet
Metrel ES Manager User Guide

Software

Metrel ES Manager (reccommended)
Patlink 2.0 * (64bit Version)
Download aPAT Software
USB PC Drivers

*) Please ensure Microsoft NetFramework 3.5 is installed before starting the Patlink Pro setup.

Setup Overview

Here's how to set up your Delta Pro Print Pack for first-time use:

  1. Power on the DeltaPAT and connect it to mains or insert fully charged batteries.
  2. Plug in or pair the Zebra printer via USB or Bluetooth (depending on the model).
  3. Ensure the label roll is installed correctly.
  4. On the DeltaPAT:
    • Navigate to Setup > Communication to configure printer output
    • Select the appropriate port (USB or Bluetooth)
    • Enable auto-print or manual print after the test
  5. Run a test and verify that the printer successfully produces a tag with the desired data.

Video Guides

How to Activate aPAT on your DeltaPAT 3309 BT

aPAT Settings Explained on your DeltaPAT 3309 BT

How to Retest and Rescan using aPAT

How to Add Your Logo to Tags with aPAT

Add DeltaPAT 3309 BT to your aPAT Database

Pair Your DeltaPAT 3309 BT to Your Printer

Upload & Download Test Sequences with aPAT Software

Create a New aPAT Database and Add Multiple Items Fast

Metrel aPAT Software Webinar

Trustpilot

Delta Pro Print Pack - Support FAQs

How do I connect the DeltaPAT to the Zebra printer?

You can connect via USB (direct cable) or Bluetooth, depending on the version of your Zebra printer.

  • For USB: Plug the printer into the DeltaPAT's USB port.
  • For Bluetooth: Go to Setup > Communication > Bluetooth and select the Zebra printer. The default passcode is 0000.

Why isn't the printer producing any labels after a test?

Confirm that Auto Print is enabled in the test setup.

  • Ensure the correct output device is selected under Setup > Communication.
  • Check the label roll is installed correctly and that the printer isn't paused or out of paper.
  • Restart both the DeltaPAT and the printer to reset the connection.

Can I customise what gets printed on the label?

Yes. Use the PATLink PRO software to define what information appears on printed labels, including:

  • Company logo
  • Asset ID
  • Test date & due date
  • Technician name

You can upload this configuration to the DeltaPAT via USB.

Does the DeltaPAT store test results for later printing?

Yes. The device has onboard memory to store approximately 1,500 test results. You can review, export, or print them anytime using PATLink or ES Manager software.

What's included in the Pro Print Pack?

Typically:

  • Metrel DeltaPAT MI 3309 BT
  • Zebra thermal printer (Bluetooth or USB)
  • Label starter roll
  • Metrel ES Manager software
  • Carry case
  • Calibration certificate
  • All required cables

Please check your product page for a complete itemised list.

What labels can I use with this kit?

We recommend direct thermal labels, ideally in a size compatible with the Zebra printer's label sensor. Most commonly used:

  • 100mm x 50mm
  • 89mm x 36mm

For best results, use official Appliance Testing Supplies tags that are tested for compatibility.

Can I reprint a label for the last test?

Yes. Navigate to the test history on the DeltaPAT and select the previous result. Choose the "Print" option to regenerate the label.

The printer displays a "Media Out" or "Paper Jam" error. What should I do?

Open the printer cover and verify the label roll is loaded properly.

  • Ensure the sensor is aligned with the label gap.
  • Reset the printer and try again. If the problem persists, refer to the Zebra printer guide or contact support.

Still Need Help?

Call us on 1300 656 938

Email: sales@appliancetestingsupplies.com.au

Or use TeamViewer for remote support